Henry Eckert Hand Scrapers – France

FullSizeRender 139

Henry Eckert hand scrapers are made for us in France. They come in both rectangular and curved shapes. The thicknesses are from .25mm, .40mm, .60mm & .80mm catering for any scraper requirement. Timbers that tear out are common in Australia. Occurring mainly in patches, the tear out can be removed with a sharp hand scraper.
Hand scrapers are indispensable for smoothing flat wood surfaces, removing marks left by planing and routing, smoothing hollow and convex surfaces, cleaning glued joints and levelling uneven varnish coats.
Sharpened properly and burnished with an appropriate tool, they are capable of removing the finest shavings and leaving a smooth and precise surface finish. By varying the pressure, angle and curvature of the scraper, you can achieve superb results even against the grain, knotty & cross-grained wood, inlays, tear out prone timber, etc.

We also have a nice leather pouch to accommodate the scrapers. The Arno Burnisher is also a good partner for the scrapers.

See the complete range here.

Made in France.


Related News

Gray Hawk – Practising Perfection

By David Eckert | November 9, 2017

While I was researching materials for the new Henry Eckert Marking Gauge system a while back, I dropped in to see Gray Hawk for some advice on wood suitability and availability. I met Gray quite a few years ago after a Hand Tool Event we had in Adelaide. Gray came to the event and invited Chris…

Pouring Bronze, Powdered Metallurgy?? & Demo Tools…

By David Eckert | November 17, 2017

Summer is alive and well in Adelaide, earlier this week 35° Celsius, and Joe & Peter are pouring a new bronze tool in their foundry without air conditioning, a certain dedication. Beer o’clock came early that day… More on the new tool soon. These guys have been pouring sand cast bronzes for many decades, there…

Henry Eckert Chisel / Flush Plane

By David Eckert | November 30, 2017

Our White Bronze Chisel/Flush Plane has been around us in various forms for around a year now. Our pattern maker is over it, too many changes! He uses Jelutong wood to do the initial shape, changes are easy if you are reducing the shape but not so easy to increase the shape. After we both…